Efficacy of copper blend coatings in reducing SARS-CoV-2 contamination.

SARS-CoV-2 is a highly infectious virus and etiologic agent of COVID-19, which is spread by respiratory droplets, aerosols, and contaminated surfaces. Copper is a known antiviral agent, and has resulted in successful reduction of pathogens and infections by 83-99.9% when coated on surfaces in intensive care units. Additionally, copper has been shown to inactivate pathogens such as Coronavirus 226E, a close relative of SARS-CoV-2. Here, we examine the ability of two copper blends with differing compositions to inactivate SARS-CoV-2 virus at different time points. Copper Blend 2 (75.07% pure copper) was found to significantly reduce (over 50%) the viability of SARS-CoV-2 at 5 min of contact, with at least 98% reduction in recovered virus at 20 min (vs. plastic control). However, Copper Blend 1 (48.26% pure copper), was not found to significantly reduce viability of SARS-CoV-2 at any time point when compared to plastic. This may indicate that there is an important percentage of copper content in materials that is needed to effectively inactivate SARS-CoV-2. Overall, this study shows that over the course of 20 min, coatings made of copper materials can significantly reduce the recovery of infectious SARS-CoV-2 compared to uncoated controls, indicating the effective use of copper for viral inactivation on surfaces. Furthermore, it may suggest higher copper content has stronger antiviral properties. This could have important implications when short turnaround times are needed for cleaning and disinfecting rooms or equipment, especially in strained healthcare settings which are struggling to keep up with demand.

Feasibility of At-Home Virological and Serological Testing for SARS-CoV-2 in Children.

Longitudinal virological and serological surveillance is essential for understanding severe acute respiratory syndrome coronavirus 2 (SARS CoV-2) transmission among children but requires increased test capacity. We assessed the uptake of serial at-home testing in children (2-17 years) via mailed SARS-CoV-2 antibody and molecular tests. Completion rates demonstrated the feasibility and sustainability of at-home testing across age groups.

Inactivation strategies for SARS-CoV-2 on surgical masks using light-activated chemical dyes.

BACKGROUND: Methylene blue (MB) and riboflavin (RB) are light-activated dyes with demonstrated antimicrobial activity. They require no specialized equipment, making them attractive for widespread use. Due to COVID-19-related worldwide shortages of surgical masks, simple, safe, and effective decontamination methods for reusing masks have become desirable in clinical and public settings. MATERIAL AND METHODS: We examined the decontamination of SARS-CoV-2 Beta variant on surgical masks and Revolution-Zero Environmentally Sustainable (RZES) reusable masks using these photoactivated dyes. We pre-treated surgical masks with 2 MB concentrations, 2 RB concentrations, and 2 combinations of MB and RB. We also tested 7 MB concentrations on RZES masks. RESULTS: Photoactivated MB consistently inactivated SARS-CoV-2 at >99.9% for concentrations of 2.6 µM or higher within 30 min on RZES masks and 5 µM or higher within 5 min on disposable surgical masks. RB alone showed a lower, yet still significant inactivation (∼93-99%) in these conditions. DISCUSSION: MB represents a cost-effective, rapid, and widely deployable decontamination method for SARS-CoV-2. The simplicity of MB formulation makes it ideal for mask pre-treatment in low-resource settings. CONCLUSIONS: The results demonstrate that MB effectively decontaminates SARS-CoV-2 at concentrations above 5 µM on surgical masks and above 10 µM on RZES masks.

Exploring inactivation of SARS-CoV-2, MERS-CoV, Ebola, Lassa, and Nipah viruses on N95 and KN95 respirator material using photoactivated methylene blue to enable reuse.

BACKGROUND: The COVID-19 pandemic resulted in a worldwide shortage of N95 respirators, prompting the development of decontamination methods to enable limited reuse. Countries lacking reliable supply chains would also benefit from the ability to safely reuse PPE. Methylene blue (MB) is a light-activated dye with demonstrated antimicrobial activity used to sterilize blood plasma. Decontamination of respirators using photoactivated MB requires no specialized equipment, making it attractive for use in the field during outbreaks. METHODS: We examined decontamination of N95 and KN95 respirators using photoactivated MB and 3 variants of SARS-CoV-2, the virus that causes COVID-19; and 4 World Health Organization priority pathogens: Ebola virus, Middle East respiratory syndrome coronavirus, Nipah virus, and Lassa virus. Virus inactivation by pretreating respirator material was also tested. RESULTS: Photoactivated MB inactivated all tested viruses on respirator material, albeit with varying efficiency. Virus applied to respirator material pre-treated with MB was also inactivated, thus MB pretreatment may potentially protect respirator wearers from virus exposure in real-time. CONCLUSIONS: These results demonstrate that photoactivated MB represents a cost-effective, rapid, and widely deployable method to decontaminate N95 respirators for reuse during supply shortages.

Low-dose in vivo protection and neutralization across SARS-CoV-2 variants by monoclonal antibody combinations.

Prevention of viral escape and increased coverage against severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) variants of concern require therapeutic monoclonal antibodies (mAbs) targeting multiple sites of vulnerability on the coronavirus spike glycoprotein. Here we identify several potent neutralizing antibodies directed against either the N-terminal domain (NTD) or the receptor-binding domain (RBD) of the spike protein. Administered in combinations, these mAbs provided low-dose protection against SARS-CoV-2 infection in the K18-human angiotensin-converting enzyme 2 mouse model, using both neutralization and Fc effector antibody functions. The RBD mAb WRAIR-2125, which targets residue F486 through a unique heavy-chain and light-chain pairing, demonstrated potent neutralizing activity against all major SARS-CoV-2 variants of concern. In combination with NTD and other RBD mAbs, WRAIR-2125 also prevented viral escape. These data demonstrate that NTD/RBD mAb combinations confer potent protection, likely leveraging complementary mechanisms of viral inactivation and clearance.

Addressing personal protective equipment (PPE) decontamination: Methylene blue and light inactivates severe acute respiratory coronavirus virus 2 (SARS-CoV-2) on N95 respirators and medical masks with maintenance of integrity and fit.

OBJECTIVE: The coronavirus disease 2019 (COVID-19) pandemic has resulted in shortages of personal protective equipment (PPE), underscoring the urgent need for simple, efficient, and inexpensive methods to decontaminate masks and respirators exposed to severe acute respiratory coronavirus virus 2 (SARS-CoV-2). We hypothesized that methylene blue (MB) photochemical treatment, which has various clinical applications, could decontaminate PPE contaminated with coronavirus. DESIGN: The 2 arms of the study included (1) PPE inoculation with coronaviruses followed by MB with light (MBL) decontamination treatment and (2) PPE treatment with MBL for 5 cycles of decontamination to determine maintenance of PPE performance. METHODS: MBL treatment was used to inactivate coronaviruses on 3 N95 filtering facepiece respirator (FFR) and 2 medical mask models. We inoculated FFR and medical mask materials with 3 coronaviruses, including SARS-CoV-2, and we treated them with 10 µM MB and exposed them to 50,000 lux of white light or 12,500 lux of red light for 30 minutes. In parallel, integrity was assessed after 5 cycles of decontamination using multiple US and international test methods, and the process was compared with the FDA-authorized vaporized hydrogen peroxide plus ozone (VHP+O3) decontamination method. RESULTS: Overall, MBL robustly and consistently inactivated all 3 coronaviruses with 99.8% to >99.9% virus inactivation across all FFRs and medical masks tested. FFR and medical mask integrity was maintained after 5 cycles of MBL treatment, whereas 1 FFR model failed after 5 cycles of VHP+O3. CONCLUSIONS: MBL treatment decontaminated respirators and masks by inactivating 3 tested coronaviruses without compromising integrity through 5 cycles of decontamination. MBL decontamination is effective, is low cost, and does not require specialized equipment, making it applicable in low- to high-resource settings.

It is currently unknown whether SARS-CoV-2 is viable in semen or whether COVID-19 damages spermatozoa.

Research is needed to understand the presence of the SARS-CoV-2 virus in semen, sexual transmissibility, and impact on sperm quality. Several studies have examined men recovering from COVID-19, but large-scale community-based testing is needed to ascertain the effects on the male reproductive tract, and the potential for prolonged transmission.